Sofia Masi

Advanced Optical Materials, 2020, 9 (4), 2001508 (1-6).

Rad, R.Rafiei; Gualdrón-Reyes, A.F.; Masi, S.; Ganji, B.Azizollah; Taghavinia, N.; Gené-Marimon, S.; Palomares, E.; Mora-Seró, I.

Tunable Carbon–CsPbI3 Quantum Dots for White LEDs.

Article page: https://onlinelibrary.wiley.com/doi/full/10.1002/adom.202001508

Journal of Materials Chemistry C, 2020, 8, 14834-14844.

Piatkowski, P.; Masi, S.; Galar, P.; Tovar, M.Gutierrez; Ngo, T.Tuyen; Mora-Seró, I.; Douhal, A.

Deciphering the role of quantum dot size in the ultrafast charge carrier dynamics at the perovskite–quantum dot interface.

Article page: https://pubs.rsc.org/en/Content/ArticleLanding/2020/TC/D0TC03835K#!divAbstract

Advanced Energy Materials, 2020, 10 (46), 2002422 (2-9).

Sánchez-Godoy, H.Emmanuel; Erazo, E.Ansisar; Gualdrón-Reyes, A.F.; Khan, A.Hossain; Agouram, S.; Barea, E.M.; Rodriguez, R.Arturo; Zarazua, I.; Ortiz, P.; Cortés, M.Teresa; Muñoz-Sanjosé, V.; Moreels, I.; Masi, S.; Mora-Seró, I.

Preferred Growth Direction by PbS Nanoplatelets Preserves Perovskite Infrared Light Harvesting for Stable, Reproducible, and Efficient Solar Cells.

Article page: https://onlinelibrary.wiley.com/doi/full/10.1002/aenm.202002422

Nanomaterials, 2020, 10 (8), 1586.

Erazo, E.Ansisar; Sánchez-Godoy, H.E.; Gualdrón-Reyes, A.F.; Masi, S.; Mora-Seró, I.

Photo-Induced Black Phase Stabilization of CsPbI3 QDs Films.

Article page: https://www.mdpi.com/2079-4991/10/8/1586

ACS Applied Electronic Materials, 2020, 2 (8), 2525–2534.

Salim, K.M.Muhamme; Hassanabadi, E.; Masi, S.; Gualdrón-Reyes, A.F.; Franckevicius, M.; Devižis, A.; Gulbinas, V.; Fakharuddin, A.; Mora-Seró, I.

Optimizing Performance and Operational Stability of CsPbI3 Quantum-Dot-Based Light-Emitting Diodes by Interface Engineering.

Article page: https://pubs.acs.org/doi/abs/10.1021/acsaelm.0c00431

Nanoscale, 2020, 12, 14194-14203.

Hassanabadi, E.; Latifi, M.; Gualdrón-Reyes, A.F.; Masi, S.; Yoon, S.Joon; Poyatos, M.; Julián-López, B.; Mora-Seró, I.

Ligand & band gap engineering: tailoring the protocol synthesis for achieving high-quality CsPbI3 quantum dots.

Article page: https://pubs.rsc.org/en/content/articlehtml/2020/nr/d0nr03180a

ACS Energy Letters, 2020, 5 (6), 1974-1985.

Masi, S.; Gualdrón-Reyes, A.F.; Mora-Seró, I.

Stabilization of Black Perovskite Phase in FAPbI3 and CsPbI3.

Article page: https://pubs.acs.org/doi/10.1021/acsenergylett.0c00801

ACS Energy Letters, 2020, 5 (4), 1013-1021.

Rodríguez-Romero, J.; Sánchez-Diaz, J.; Echeverría-Arrondo, C.; Masi, S.; Esparza, D.; Barea, E.M.; Mora-Seró, I.

Widening the 2D/3D Perovskite Family for Efficient and Thermal-Resistant Solar Cells by the Use of Secondary Ammonium Cations.

Article page: https://pubs.acs.org/doi/10.1021/acsenergylett.9b02755

Nanomaterials, 2020, 10 (5), 872.

Marand, Z.Rezay; Kermanpur, A.; Karimzadeh, F.; Barea, E.M.; Hassanabadi, E.; Anaraki, E.Halvani; Julián-López, B.; Masi, S.; Mora-Seró, I.

Structural and Electrical Investigation of Cobalt-Doped NiOx/Perovskite Interface for Efficient Inverted Solar Cells.

Article page: https://www.mdpi.com/2079-4991/10/5/872

ACS Energy Letters, 2020, 5 (2), 418-427 (1-10).

Masi, S.; Echeverría-Arrondo, C.; Salim, K.M.Muhamme; Ngo, T.Tuyen; Mendez, P.F.; Lopez-Fraguas, E.; Macias-Pinilla, D.F.; Planelles, J.; Climente, J.I.; Mora-Seró, I.

Chemi-Structural Stabilization of Formamidinium Lead Iodide Perovskite by Using Embedded Quantum Dots.

Article page: https://pubs.acs.org/doi/10.1021/acsenergylett.9b02450

ACS Applied Materials and Interfaces, 2020, 12 (1), 914−924.

Gualdrón-Reyes, A.F.; Rodríguez-Pereira, J.; Amado-Gonzalez, E.; Rueda-P, J.; Ospina, R.; Masi, S.; Yoon, S.Joon; Tirado, J.; Jaramillo, F.; Agouram, S.; Muñoz-Sanjose, V.; Giménez, S.; Mora-Seró, I.

Unravelling the Photocatalytic Behavior of All-Inorganic Mixed Halide Perovskites: The Role of Surface Chemical States.

Article page: https://pubs.acs.org/doi/10.1021/acsami.9b19374

ACS Applied Energy Materials, 2019, 2, 12, 8381-8387.

Lopez-Fraguas, E.; Masi, S.; Mora-Seró, I.

Optical Characterization of Lead-Free Cs2SnI6 Double Perovskite Fabricated from Degraded and Reconstructed CsSnI3 Films.

Article page: https://pubs.acs.org/doi/10.1021/acsaem.9b01827

Nanoscale Advances, 2019, 1, 4109-4118.

Ngo, T.Tuyen; Masi, S.; Méndez, P.Fabiola; Kazes, M.; Oron, D.; Mora-Seró, I.

PbS quantum dots as additives in methylammonium halide perovskite solar cells: the effect of quantum dot capping.

Article page: https://pubs.rsc.org/en/content/articlelanding/2019/NA/C9NA00475K#!divAbstract

Solar RRL, 2019, 1900191, 1-6.

Méndez, P.Fabiola; Muhammed, S.K.M.; Barea, E.M.; Masi, S.; Mora-Seró, I.

Analysis of the UV–Ozone-Treated SnO2 Electron Transporting Layer in Planar Perovskite Solar Cells for High Performance and Reduced Hysteresis.

Article page: https://onlinelibrary.wiley.com/doi/full/10.1002/solr.201900191